Description Reviews Bike Fitment

Description

Compact Inline Fuel Filter

This is a very compact and effective fuel filter, only 31 mm long ( 1-1/4"). The unique design features two chambers separated by a screen, so you can easily see blockage. This design also provides for maximum flow for a filter of this size. Ideally used on 6mm ID fuel hose.

Please note:This filter is designed for gravity feed applications only and should NOT be used on any vehicle with a fuel pump. This Fuel Filter does NOT work with our 7mm Braided Fuel Line part # 1311827.

Customers Who Bought This Product Also Bought

**Copper Crush Seal Rings**

★★★★★ ★★★★★

Assortment of Sizes Available Starting At: $0.60

**Oil Filter Kit With Cooler OX36D**

★★★★★ ★★★★★

**2V Oil Cooler, Kit** $19.95

**Oil Filter Kit w/o Cooler OX37D**

★★★★★ ★★★★★

**2V w/o Oil Cooler, Kit** $18.95

**Fuel Hose 7mm Braided 1 Meter**

★★★★★ ★★★★★

$19.95

**Air Filter LX194**

★★★★★ ★★★★★

**2V 1970-1979** $18.95

**Aluminum Seal Rings** Assortment of Sizes Available Starting At: $0.35

**Gasket Set for 2 32mm Carbs, W/ Diaphragm**

★★★★★ ★★★★★

$69.95

**One Piece Oil Filter MAHLE OX35**

★★★★★ ★★★★★

**One-piece 2V Twin** $19.95

**Air Filter LX56**

★★★★★ ★★★★★

**2 Valve 1980 - on** $34.95

**Throttle Shaft Screw**

★★★★★ ★★★★★

$0.95

Reviews
Write a review

Currently Viewing Reviews with a rating of 1. Click here to reset.

★★★★★ ★★★★★

1/5 Star out of 4 Reviews

Write a Review

5 ★

4 ★

3 ★

2 ★

1 ★

7mm Fuel line I too large for this filter

★

Joe | November 3rd, 2022

This fuel filter nipple is too small for the spec hose for BMW late Airheads. I replaced all fuel lines with the ones recommended by Boxer 2-valve and added these filters. The result was a net immediate gasoline leak.

Not a good fit

★

Jere Visalli | June 19th, 2021

Purchased two and the woven fuel line from B2V. The fuel line is too big ID for the filter and the fuel will begin to leak out after one ride. You will need to use smaller line if you want to use these

Red fuel filters

★

joe taffuri | August 23rd, 2018

These melt under normal operation I wanted a refund to no avail W-lich states they sell a lot with no problem and my bike is running too hot This is the second review stating the same thing DONT BUT THEM

Show All Reviews

heat from cylinders/motor deforms the plastic

★

Andy V. (Sacramento, Ca) | June 5th, 2015

not sure if these are right for airheads to sit above the cylinders. the two i have, the fuel fitting spots have completely gotten deformed to the point where one is almost clogged (they are oh less than 3 weeks old) but because the plastic is melting. the indentations or babs for the line on mine have completely smoothed out. its crazy! At $4 a pop, they need to be more durable than that. the fuel line ended up loosening and leaked fuel everywhere because the attaching points on the filter have gotten smaller!!